THE PERFECT PREVENTIVE MAINTENANCE PRODUCT
No wires or
screws-ins on the top of the battery. No switches or timers. Simply add
the liquid additive, Battery Equaliser, to each cell and let the
product work while the vehicle is in normal use and being charged.
As
soon as electrolyte is added to a new battery fresh off the assembly
line, sulfation begins coating the lead plates. This causes internal
resistance that lowers overall performance and, in a few years chokes
out all electrical activity. Battery Equaliser is designed to mix with
the battery's electrolyte solution, dissolving existing sulfation and
preventing new deposits from forming. Treated batteries will charge
faster and hold a charge longer.
Battery Equaliser is
recommended for treating new or used batteries, in working condition
(no dead cells). Then with normal use Battery Equaliser will make all
internal parts tougher and resistant to shedding and sulfation. A car
battery can be treated with as little as a half ounce per cell. Larger
batteries require a little more, as directed, most 36 volt (700Ah -
850Ah) require 3.5oz per cell. The proper dose is determined by the
amount of lead being treated.
There are no parts to screw on,
nothing on the outside of the battery to pull off or break. The battery
chemistry is improved from within while the battery is in use; it is
fully effective within 5 cycles.
Example of Annual PM:
- 36 volt (700Ah - 85OAh) forklift battery.
- 3.5 oz per cell - Cost $100.00
- Battery Equaliser is as easy to apply as watering the battery.
Benefits from Annual PM:
- Longer battery life
- Reduced charge time
- Longer run time
- Reduced operating costs; battery replacement,
man-hours, utility bills.
Battery
Equaliser USA, LLC is the exclusive blender and distributor in the US
and Canada. This product is non-flammable, non-corrosive and is NOT
restricted by D.O.T.
|
|
